spine board specifications- Manufacturers Suppliers Factory From China

The examination beds are divided into general examination beds and gynaecological examination beds. The gynaecological examination bed is also known as a gynaecological operating table. It is an auxiliary medical equipment for hospitals, clinics, birth control stations and mobile gynaecological examination vans for various gynaecological examinations, diagnostic procedures and family planning examinations. The series of products can be adjusted to the actual situation in various positions of the patient during the consultation.

We will present three different models.

The First Model:

This product has a crossbar between headboard and footboard.

It is Stainless steel frame, foot with anti-noise rubber and back rest. It can be operated by gas-spring. High quantity sponge top with artificial leather cover (thickness: 3cm)

The design of this product focuses on humanization and comfort. The seamless design of the bed surface is more conducive to the cleaning of equipment and the cleaning and protection of medical staff.

The Second Model:

The table consists of three parts, the headrest, the seating position and the removable foot section, which folds 90° when the foot extension is not in use.

Underneath the seating section of the table there is a waste collection tray that complies with hygiene standards.

The table has a retractable heel support system, this support section can be tilted to the left or right and when not in use it can be folded and concealed within the body of the table.

The leg extensions of the table can be removed and fixed and when not in use, they can be lowered with one simple movement.

The movement of the table up and down, back and seat is carried out by means of an electric motor which is placed in a system that does not distort the image.

The electric motor is operated by hand control or there is an option to make this system foot controlled.

The table has the capacity to carry patients of up to 120-160 kg without vibration.

The table has a towel suspension at the back which can be easily attached and removed if necessary.

The rising and lowering measures in the up-and-down movement of the table do not prevent the patient from reaching the table easily.

The Third Model:

Product introduction:

The total length of the table is 1800mm and the width is 550mm (20mm).

The minimum height of bed surface is 500mm, and the maximum height of bed surface is 1200mm.

Height adjustment range: 300 mm

Maximum load: 200kg

The bed surface is divided into 4 parts: head section, back section, hip section and auxiliary table. It has a pull-out hidden auxiliary table, which is easy to operate. The two sides of the bed are equipped with large arc armrests that can be opened to facilitate the patient's position adjustment. The foam sponge shell is soft and comfortable. The height and distance adjustable foot rest can be adjusted to the comfortable position according to the needs of patients and doctors. The table is equipped with a hand-held operating system to ensure trouble free operation. It can realize accurate linear movement, and the waterproof cap design can prevent sewage, dirt and static electricity, and make it use and move freely for years. All stainless steel shield, advanced spray plastic bed and column structure, easy to clean, anti pollution, seamless mattress, easy to clean, corrosion resistant, not easy to damage, antibacterial, anti-static, can effectively prevent patients from

bedsore.

A hidden sewage basin is arranged under the bed body, which can be easily pulled out or retracted, and is convenient for treating sewage and sundries

This product is used for parturient or general obstetric operation. It is especially suitable for the

examination and diagnosis of various instruments and microscopes in obstetrics and Gynecology

and urology.

This examination bed belongs to the field of medical equipment, its structure includes bed board, frame and bed leg, the bed board is set on the frame, said bed board includes back board and main board, the back board and main board are hinged to each other, said main board is installed on the frame on both sides of handrail, handrail side of the frame is installed on each side of the liftable leg support frame; the lower surface of the frame is installed on the guide slide, the guide slide is installed in its sliding connection The lower surface of the shelf body is installed with a guide rail, and a positioning seat is installed in the guide rail, and a footrest is installed below the positioning seat. Compared with the existing technology, the utility model has the features of reasonable design, simple structure, convenient use and good use effect.

Precautions.

1. Do not adjust the angle of each segmental plate while a patient is lying on the examination bed.

2. Remove all sewage from the bed after each use to keep the bed and accessories tidy and to prolong service life.

3. The examination bed must be serviced once a year

1. What is a folding spine board?

The spine board is made of fiberglass or fiberglass-reinforced plastic. The main advantage of this kind of material is that it can be easily folded and molded into any shape. It can be used to hold the spine and protect it from damage.

It’s a fairly simple setup: there are two parts, one for each side, with two holes opposite each other in the middle. It basically consists of a long piece (like a tablecloth) with a hole drilled through it. At the two opposite sides of the board, you attach one end to the table (or sometimes a hardboard or some kind of support) and then fasten the other end to your patient or another part of your equipment (which will support the patient). The whole thing is held together by screws, bolts, or rivets that pass through both pieces at different points on their lengthwise axis.

The most common problem when using this kind of system is that during exercise, air bubbles can get trapped in between the table and your patient as they exert pressure on each other – especially when you are holding them in different positions. Also, if you have a hard surface on either side (a soft surface would not work well because it might start squeaking), then in order to avoid air bubbles getting trapped between them you have to adjust the angle at which you open up those holes so that their edges touch one another – more on this later.

2. How to move a patient on a folding spine board

The folding spine board is made from fiberglass or fiberglass-reinforced plastic. It is a kind of material that can be easily folded and molded into any shape. It can be used to hold the spine and protect it from damage, for example when moving a patient on a stretcher, or when holding an object that needs to be kept from falling off the stretcher (such as a bag of medicine).

This type of material is great for moving patients on stretchers, but it’s also very useful in other applications such as holding bags of medicine or other stuff. You can use it to hold objects or parts of them while still keeping them stable on a patient’s back. You can also use this material while they are moving around their legs (and putting weight on their feet) because it absorbs some of the impact during their movements. It’s best used with inflatable medical devices so they don’t get damaged too much during transport.

3. Tips for moving a patient on a folding spine board

The spine board is a piece of equipment that has its shape and location defined by the patient. This can be done by using some kind of padding, but it is also possible to move a patient on a folding spine board freely.

The right way to use the spine board depends on how the patient moves; if he or she walks towards you, for example, you will use the spine board in such a way that it does not interfere with his or her movements.

It is also important that you do not lie on the patient so that his or her weight remains relatively evenly distributed throughout their body. Lying down on the spine board can cause your patients to fall off, so it is important to keep them in an upright position as much as possible.

If you are moving your patient across different surfaces, then it is good to have a pair of floor mats or even carpet underfoot.

A good way to see how your patient would move on this kind of board is by trying out different positions yourself. Ask him or her where they would like to go next and follow them around while they are there, doing up-and-down movements and then turning around and around again.

The safest thing to do when moving patients who cannot move themselves (such as infants) is try standing behind them and being careful not to get too close—this can be dangerous for both of you! We also don't want our patients lying flat on their back either (to avoid spinal cord injuries).

A Foldable stretcher is also called an emergency stretcher. It is also known as a stretcher, Foldable stretcher, aluminum stretcher, aluminum alloy Foldable stretcher, simple stretcher, etc.

In life, we rarely come into contact with the use of stretchers to transport the wounded. Because we are no longer in the war years, we are now transported by specialized medical staff. But we still need to know the necessary handling knowledge, so what are the advantages of a foldable Stretcher?

Foldable and easy to transport and carry.

For example the Model DW-F007X

The China foldaway stretcher is characterized by its being lightweight, small-sized, easy to carry, use-safely, and easy for sterilization.

Easy to operate

The Foldable stretcher manufacturer is not bumpy and smooth to go up and down stairs, it is flexible in turning, so it saves time and effort and can be operated on in time and for a short time to rescue patients, which is widely used in hospitals to go up and down stairs and ambulances to transport and rescue patients.

Long service life

The fabric of the stretcher is sewn in high-density polyethylene-coated nylon and is flame retardant. Also, it is waterproof and hard-wearing. The frame of the stretcher is a high-grade aluminum alloy. The load capacity is up to 159kg.

In summary, the foldable stretcher suplier is safe to use with a carrying handle and is mainly used for carrying patients and wounded people in emergency centers, hospitals, and on the battlefield. It is easy to store and its ability to fold up is ideal for tight spaces.

The foldable stretcher is made of top-grade aluminum alloy with strict criteria and standards which are upheld, all the products are top-quality and come with a satisfaction guarantee.

This Foldable stretcher folds away compactly in its free carrying bag.

The stretcher has sturdy aluminum feet with rubber pads which keep the patient off the ground but also allow movers to safely get their hands Under the rubber handles.

Set up can be done by a single person in under 30 seconds from unzipping the bag to full deployment.

The thick PVC sheet that patients will lay on is fireproof, anti-tear, and stain-resistant making it reliable and easy to clean.

Additional points to note:

1, Never carry until personnel, stretchers, etc. have been properly prepared.

2、To prevent accidents such as falls during handling of overweight and unconscious casualties on the way.

3、At special sites, special methods should be carried out by the situation.

(1) At the scene of a fire, when carrying a member in the smoke, the waist should be dome or street running forward; at the scene of a toxic gas leak, the collector should first use wet wool to cover the mouth and nose or use a gas mask to avoid fainting from the gas.

(2) Before transporting the victim, check the vital signs and parts of the victim, focusing on the head, and chest, especially if the cervical spine is damaged.

4, First of all, keep the casualty's airway open, and then the injured parts of the casualty are required by the specifications for technology adoption to stop bleeding, bandaging, and fixation. Only after proper treatment can the casualty be moved.

5, In the process of moving to observe the casualty's condition, changes at any time.

Focus on the observation of breathing, consciousness, etc., pay attention to warmth, but do not cover the head and face too tightly, so as not to affect breathing.

If an emergency occurs on the way, such as room breathing or respiratory arrest, stop moving and carry out first aid treatment immediately.

People eat grains and cereals, it is inevitable that there are times when they get sick, and nowadays, with advanced medical care, when you get sick, of course, you will go to the hospital for treatment. Most people are treated through intravenous infusions to reduce inflammation and cough, etc. Therefore, when there is a high incidence of some diseases, we will see a large number of people sitting in the infusion room are dripping or waiting for the drip. There are even some elderly people who do not have enough nutrients in the heat of the day and go for nutrient delivery by IV. So for hospitals, IV stand are an indispensable tool. So what are the different varieties of IV stand, what materials are they made of, and are the prices of IV stand on the market now high? Let's talk about it briefly today!

1. the price of IV stand depends on different varieties

1.1 children's IV stand price is higher

Children's illness often makes all parents very heartbroken. Especially when the fever does not go down, parents will take their children to the IV drip, but look at the child is very mobile, so in the past, only the parents can only hold the child's hand throughout the IV drip, and the previous IV stand are for adults, did not take the child's small into account, and now the IV stand have special can provide for children to use, such as in the children's hospital infusion room inside the There are a large number of stand that are specifically provided for children's IV infusion, and the price of these children's IV stand is slightly higher. Not only can they be adjusted up and down according to the size of the child, they can also be adjusted according to the length of the arm, and they can also have the function of fixing the child's arm, which greatly liberates the parents and the child.

1.2 the price of removable IV stand is relatively high

Most of the intravenous infusion is fixed directly on the seat, generally speaking, the left and right front and rear can be provided to four people for infusion use. But now there are also many are movable IV stand, these IV stand can be used one to one. The main function is that when some patients need to go to the bathroom, or when inpatients need to take a drip to the examination, they can move directly to their desired destination. Then the price of this kind of IV stand will be higher, in addition to the original structure, it also needs to have a wheel function underneath.

2. The price of IV stand depends on different materials and patents

2.1 The price of IV stand is slightly higher for high quality material

In fact, many of the IV stand used to be quite simple, and were made of wooden sticks, similar to coat hangers, to place the infusion. But because the loss of wood is relatively large, and the hospital because itself is the need for high-intensity sterilization, so the wooden loss will be particularly fast, now most of the use of stainless steel infusion rod, so that can be carried out for many years without changing, and can be for the role of corrosion to reduce the impact to a minimum. Therefore, the price of stainless steel IV stand is slightly higher.

2.2 Various patented IV stand are slightly more expensive

Even simple IV stand need to take into account the actual use of the patient's problems, and also the handling, installation and other problems. Previously, the IV stand were all integral, so handling often required a special height of the carrier to handle. But now many IV stand manufacturers have made more disassembly features, not only that, but also more perfect support devices for smooth infusion paths according to the length and height of the patient's infusion, so that the patient can avoid backflow of blood due to low height or poor infusion, so the price of these patented IV stand is slightly higher.

3. IV stand price increase reflects humanization

3.1 IV stand price control

In fact, nowadays, many hospitals, even some private hospitals, are quite attached to IV stand, and the price also varies greatly, some cheaper ones may be a hundred dollars, but some multi-functional ones need to be priced at several thousand dollars. Then you can buy in bulk by more than one to reduce the price of IV stand to some extent.

3.2 What does the higher price of IV stand reflect?

When the price of an item is getting higher, it directly means that the demand for that product is getting higher, and IV stand are one of them. The patient is already in pain, is it possible that the patient enjoys limited comfort in the process of treatment is also what many people are seeking now. From the previous single sitting straight to infusion, to now being able to lie down and be able to infuse according to their most comfortable angle and height is already an improvement. This is why the price of IV stand is getting higher and higher, especially for the many details that are now being improved to enhance the experience, with patented IV stand being a very good example.

Patients in the hospital are more concerned about their condition, the best treatment they can do, the best treatment effect, not the price of IV stand, but for the hospital or clinic, if you can use the best and most modern, the most humane IV stand, can provide more convenient services to patients of the equipment, so that is the real patient-oriented!