auto first aid kit- China Factory Manufacturers Suppliers

Multifunctional chest decompression and handle-operated exhaust gas drainage

Needle for puncture, including pen tube, needle for decompression and abduction and drainage cannula, decompression

The expiratory decompression needle from China factory consists of a needle base for expiratory and decompression puncture and a needle body.

The drainage cannula consists of the base of the drainage cannula and the body of the cannula.

Pneumatic needle for puncture and positioning in the drainage cannula, needle for decompression and abduction and drainage

The bushings are inserted together and positioned in the handle tube as one unit. Less

At the base of the pressure relieving puncture needle is a one-way air valve chamber and the one-way air valve chamber has

Valve type One-way valve • Insert the drain cannula into the front of the base of the decompression / extraction needle.

The center hole of the base, in the center, the utility model uses the handle tube type packaging.

It has good damage resistance, can be sterilized repeatedly and can simultaneously decompress and exhale from the chest cavity.

And drainage function, very suitable for quick rescue of the injured in the field。

The purpose of the China decompression needle manufacturer, if not sharp, is to decompress by converting a tension pneumothorax into an open pneumothorax. If you can do this quickly enough, a direct tube thoracostomy is a reasonable alternative. In a pinch, anything that opens that side of the chest will do its job - you can stick a knife in and find something to hold the hole open, maybe even a knife handle. Just a 14-hole China decompression needle is typically used ubiquitous in emergency rooms and hospitals, so it's the first helpful tool to get the job done quickly. You usually don't have time to scratch your head waiting for MacGyver's inspiration.

The basic principle of emergency decompression needles is to insert a catheter into the pleural space to create a channel for the air to escape and the accumulated pressure to escape. Although this approach is not the definitive treatment for tension pneumothorax, emergency needle decompression stops its progression and helps restore cardiorespiratory function slightly. For people with large pectoral muscles, China decompression needle length can be an issue and a long needle or vascular catheter may be needed.

Usually a large diameter vascular catheter is inserted into the midclavicular line between the second or third intercostal space. The use of a large diameter catheter is important because hemothorax can be associated with pneumothorax and the patient may require immediate IV fluids. A standing position may be helpful if it is not inappropriate due to the cervical spine or injury. This is the bridge to the definitive treatment of tubular thoracostomy. The catheter remains in place until the thoracic catheter is placed.

The procedure is as follows:

Locate anatomical landmarks and quickly prepare the puncture site with an iodine-based solution

Insert a large diameter decompression needle from China factory with catheter into the second intercostal space, above the third rib along the mid-clavicular line, 1-2 cm from the edge of the sternum (i.e. to avoid injury to the internal mammary artery)

Use a catheter or needle at least 5 cm long inserted perpendicular to the chest; however, it is important to note that in some patients the chest thickness may be greater than 5 cm and the inability to relieve symptoms may be associated with insufficient needle length ; longer pots are recommended (eg 8 cm)

Once the needle is in the pleural cavity, listen for the hissing of the escaping air to confirm the diagnosis of tension pneumothorax (note this on the patient's medical record); the air outlet may not be visible in places with high ambient noise levels

Remove the needle when the catheter is in place.

Secure the conduit in place and install the flicker valve.

Immediately after decompression, the needles begin preparing for thoracostomy tube insertion. Then reassess the patient, noting major aspects of trauma management (eg, airway, breathing, circulation). The hemothorax component is characteristic of tension pneumothorax; therefore, patients may require additional thoracostomy catheters.

Follow-up chest radiographs were taken to evaluate lung re-expansion, thoracostomy tube placement, and correction of mediastinal displacement .

A follow-up blood gas test (arterial blood gas) is required. All patients with tension pneumothorax were hospitalized.

The purpose of the needle is to allow the air that created the pneumothorax to escape, thus making room for the lung to re-expand.

With the growing population base of the elderly, electric wheelchairs are becoming more and more popular. However, the steps and methods used by many elderly people or people with limited mobility when using electric wheelchairs are unscientific, and it is easy to shorten the service life of electric wheelchairs and even cause users to be injured.

the correct operation method and steps of outdoor electric wheelchair

The electric wheelchair is a multi-functional wheelchair with artificial intelligence manipulation based on the manual wheelchair, superimposed with high-performance power-drive devices and other configurations. Electric wheelchairs can enhance the self-care ability of users and save a lot of nursing costs for families. The main users of electric wheelchairs are the elderly and the disabled. Especially for elderly friends, they must learn scientific and reasonable using methods and steps before operating the electric wheelchair to ensure that the function of the wheelchair can be fully utilized.

How to Choose a Suitable Outdoor Electric Wheelchair

It's depend on the needs of the user. If the user need to drive on uneven roads, they should choose a outdoor electric wheelchair with better obstacle-crossing function. If users often need electric wheelchairs to climb hills, they should choose a powerful model. If users want to go out frequently, they could choose a reclining wheelchair. If the user is a high paraplegic patient, he or she could choose a standing electric wheelchair.

It varies from person to person, and people can also choose to customize one. You can choose the most suitable electric wheelchair according to your specific needs.

The correct operation methods and steps for outdoor electric wheelchairs

First, carefully check the following aspects before getting into an electric wheelchair:

1. Whether the electromagnetic brake is in the closed state. If the brakes are not closed, the wheelchair may slide back when the user tries to get into the wheelchair, creating a hazard. Accidental falls are the cause of paralysis in many elderly people, and we must also pay attention to avoid such dangers as much as possible. In addition, the electric wheelchair cannot be driven normally when the clutch is on. Please check carefully before use.

2. Is the tire pressure normal? When the tire pressure of the electric wheelchair is abnormal, it will deviate when driving. If the direction of the wheelchair cannot be controlled, it is very dangerous for the disabled or the elderly in the wheelchair.

3. The power supply should be turned off. When sitting in the electric wheelchair, make sure that the power supply is turned off, otherwise, if you accidentally touch the controller or joystick, the electric wheelchair will slide out uncontrollably, which will cause a safety accident;

4. The footrests must be upright before getting into the wheelchair. For safety reasons, do not step on the pedals to get on and off the wheelchair. On the one hand, it is easy to cause damage to the wheelchair pedals or other accessories, and on the other hand, it is easy to cause people to slip and fall. Standard operation is the premise of all convenience and comfort in use.

Second, after sitting in the electric wheelchair, please follow the instructions below:

1. The most important is to fasten your seat belt. Seat belts are considered redundant most of the time, but it is necessary to develop a good habit of wearing seat belts and have safety awareness. In the event of an accident, the seat belt is the last guarantee of life.

2. Put down the pedals and place your feet flat on the pedals. Keeping your feet shoulder-width apart helps stabilize your pelvis and shares your body weight. The correct sitting posture needs to have a certain angle between the upper and lower legs, otherwise it is easy to get bedsores. If the elderly have cough, asthma, bronchitis and other diseases, when the cough is severe, please put away the pedals, step on the ground, or stand coughing is safer to prevent the elderly from suffocating due to incorrect posture. If the body is on the hips and the seat is too deep, take an additional small cushion and place it vertically behind the patient.

3. Turn on the power and gently push the controller joystick forward to drive the electric wheelchair forward. Be careful not to accelerate suddenly, accelerate slowly and observe the surrounding road conditions before accelerating.

4. Strictly abide by the traffic rules, do not run red lights, do not take the fast lane, and pay attention to avoid pedestrians and non-motor vehicles.

5. When encountering an obstacle or a section with a steep slope, please take a detour, or ask passers-by to assist in passing, and do not pass without certainty, so as to avoid potential safety hazards.

The above is the correct way to use the electric wheelchair.

There are a variety of reasons why someone might need a portable IV pole. Perhaps you are recovering from surgery and need to keep your IV line in while you are on the go. Maybe you are a caretaker for an elderly parent and need to be able to move them around easily. Or maybe you are a nurse who needs a portable IV pole to help you move patients around. Whatever your needs, a portable IV pole can be a valuable tool. This comprehensive guide will help you decide which portable IV pole is right for you.

1. What are the primary purposes of a portable IV pole?

There are many purposes for a portable IV pole. Some of the primary purposes include carrying IV fluid bags, medication, and other medical supplies. Portable IV poles can also be used to help patients walk or move around. They are typically lightweight and easy to transport, making them ideal for use in a variety of settings.

2. What are some of the key benefits of using a portable IV pole?

There are a number of key benefits to using a portable IV pole. Perhaps most importantly, a portable IV pole can help to improve patient mobility and independence. By allowing patients to move around more freely, a portable IV pole can help to minimize the risk of developing blood clots and other health complications. Additionally, a portable IV pole can help to make treatments more comfortable for patients, and can also make it easier for nurses and other caregivers to provide care.

3. What are some of the most common applications for a portable IV pole?

There are many different applications for a portable IV pole. Some of the most common applications include using the pole to carry medical supplies or devices, to provide support for patients who are unable to walk, and to help transport patients. Additionally, portable IV poles can be used to hang intravenous bags or to suspend medical equipment.

4. How can a portable IV pole be used to improve patient care?

A portable IV pole can be used to improve patient care in a number of ways. For example, it can be used to keep track of medication and fluid intake and output. It can also be used to help patients move around more easily.

5. What are some of the key things to consider when purchasing a portable IV pole?

When purchasing a portable IV pole, there are a few key things to keep in mind. The first is the weight capacity of the pole. Make sure that the pole can support the weight of the supplies and equipment that you will be carrying. The second is the size of the pole. Make sure that it is the right size for your needs. The third is the type of locking mechanism. Make sure that the locking mechanism is easy to use and will hold the pole in place.

As a new type of medical equipment, the stretcher cart is different from the general hospital movable bed in terms of convenience. In order to alleviate the pain index of patients and the convenience index of medical care, the index has been greatly improved. However, there is not only one type of stretcher. It can be divided into several types according to different functions and places of use. The following are some of the more common types of stretchers.

The first type of medical stretcher cart belongs to the technical field of medical equipment. The current stretcher trolley has a single function, and there is no infusion rack or drainage net, so it brings a lot of trouble to the medical staff. There must be several people holding the infusion rack, drainage net, and clothes and quilt to follow the stretcher trolley before it moves, thus it's really inconvenient. Compared with the previous one, this Ambulance Stretcher greatly brings convenience to medical staff and relieves the pain of patients.

The advantages of the utility model are: the structural design is reasonable and practical, because the infusion rack, the wardrobe, and the drainage net are arranged on the frame to reduce the number of medical personnel accompanying the stretcher cart, reduce the labor intensity, and bring a lot of conveniences. This type of stretcher is specially designed for hospitals.

The second is a utility model of a multi-purpose stretcher cart, which consists of an upper frame, a wheel bracket, an axle mounted on the wheel bracket, the axle is equipped with wheels and a rear bracket. This multi-purpose stretcher is more suitable for ambulances, aka, ambulance stretcher, it’s light, foldable, and easy to carry.

It can realize the functions of a stretcher cart and an individual soldier trailer by changing the different folding methods of the wheel bracket, auxiliary bracket, and rear bracket that are hinged on the upper frame. It is also very convenient to carry and use.

The third one is a new type of convenient stretcher trolley, which can be used with all docking trolleys. There is no need to worry about the cart model and the stretcher trolley. It is only necessary to set a concave rail groove in the middle of the borders of the two sides of the stretcher bed for the docking trolley and the bottom of the groove. There are magnets, which match the two magnetic pulleys on the back of the stretcher, that is, they are all inserted from the left and right sides of the wounded, and the bandages are fastened at both ends. It is easy to operate, saves manpower, and facilitates promotion in hospitals.

The fourth type is an ambulance stretcher cart with automatic damping and buffering up and downstairs, especially when patients live in high-rise residential areas. It consists of a bracket and a rotating shaft, a damping buffer, and a damping buffer frameset at the bottom of the middle of the stretcher. One end of the stretcher is provided with a handle, a support frame, and an auxiliary wheel, the other end of the stretcher is provided with an unlocking handle, a connecting rod, and a locker, and there is a stretcher cloth on the stretcher. Up and downstairs are controlled by the unlocking handle to rotate the damping buffer wheel and the driving wheel, and the damping buffer wheel and the damping driving wheel are folded through the rotating shaft. You can walk up and down the stairs easily.

Its advantages are that the structure is simple and the operation is convenient, it’s not bumpy when you go up and downstairs and thus very stable, the whole stretcher body is flexible when it turns in all directions, which saves time and effort and can be operated in time and rescue patients in a short time. This type of equipment is often widely adopted in hospitals when patients go up and downstairs, as well as on and off the ambulances. The stretcher-type patient carrier can be panned left and right and folded. This kind of stretcher belongs to the technical field of medical equipment. There is a guide rail at each end of the upper part of the car body, and there are guide sleeves on the guide rails, which can slide along the guide rails, and can roll the sheets under the patient's body into a stretcher. The stretcher can stand vertically to one side when not in use. The wheels of the car can be retracted, thus reducing the floor space.

The above are the various types of stretcher carts and their performance characteristics. As a medical device, stretcher trolleys play a very important role, so medical staff must be careful in their choice, a regular and reliable stretcher trolley manufacturer is unavoidable. Buying genuine products to ensure quality and quantity. Stretchers are critical for patients, it will cause secondary injury if a stretcher is festered with design defects or quality problems.