spine board stretcher- China Suppliers Manufacturers Factory

1. What is a folding spine board?

The spine board is made of fiberglass or fiberglass-reinforced plastic. The main advantage of this kind of material is that it can be easily folded and molded into any shape. It can be used to hold the spine and protect it from damage.

It’s a fairly simple setup: there are two parts, one for each side, with two holes opposite each other in the middle. It basically consists of a long piece (like a tablecloth) with a hole drilled through it. At the two opposite sides of the board, you attach one end to the table (or sometimes a hardboard or some kind of support) and then fasten the other end to your patient or another part of your equipment (which will support the patient). The whole thing is held together by screws, bolts, or rivets that pass through both pieces at different points on their lengthwise axis.

The most common problem when using this kind of system is that during exercise, air bubbles can get trapped in between the table and your patient as they exert pressure on each other – especially when you are holding them in different positions. Also, if you have a hard surface on either side (a soft surface would not work well because it might start squeaking), then in order to avoid air bubbles getting trapped between them you have to adjust the angle at which you open up those holes so that their edges touch one another – more on this later.

2. How to move a patient on a folding spine board

The folding spine board is made from fiberglass or fiberglass-reinforced plastic. It is a kind of material that can be easily folded and molded into any shape. It can be used to hold the spine and protect it from damage, for example when moving a patient on a stretcher, or when holding an object that needs to be kept from falling off the stretcher (such as a bag of medicine).

This type of material is great for moving patients on stretchers, but it’s also very useful in other applications such as holding bags of medicine or other stuff. You can use it to hold objects or parts of them while still keeping them stable on a patient’s back. You can also use this material while they are moving around their legs (and putting weight on their feet) because it absorbs some of the impact during their movements. It’s best used with inflatable medical devices so they don’t get damaged too much during transport.

3. Tips for moving a patient on a folding spine board

The spine board is a piece of equipment that has its shape and location defined by the patient. This can be done by using some kind of padding, but it is also possible to move a patient on a folding spine board freely.

The right way to use the spine board depends on how the patient moves; if he or she walks towards you, for example, you will use the spine board in such a way that it does not interfere with his or her movements.

It is also important that you do not lie on the patient so that his or her weight remains relatively evenly distributed throughout their body. Lying down on the spine board can cause your patients to fall off, so it is important to keep them in an upright position as much as possible.

If you are moving your patient across different surfaces, then it is good to have a pair of floor mats or even carpet underfoot.

A good way to see how your patient would move on this kind of board is by trying out different positions yourself. Ask him or her where they would like to go next and follow them around while they are there, doing up-and-down movements and then turning around and around again.

The safest thing to do when moving patients who cannot move themselves (such as infants) is try standing behind them and being careful not to get too close—this can be dangerous for both of you! We also don't want our patients lying flat on their back either (to avoid spinal cord injuries).

Summary

Speaking of first aid blanket, often outdoor friends are definitely no strangers. The first aid blanket is an international emergency life-saving essential product, suitable for use in field exploration, inspection, tourism, and disasters. It is easy to carry, compact and practical.

First aid blanket are also called first aid blankets, survival blankets, cold blankets, thermal blankets and sunscreen blankets. Generally made of tin foil or aluminum film, it is divided into three types: double-sided gold, double-sided silver and double-sided gold and silver. In an emergency, the principle of reflection is used to protect against cold and keep warm.

First aid blanket are mainly used in cold places to prevent death due to hypothermia and hypothermia.

At times, once the weather changes and the temperature of the sleeping bag is not enough, on the one hand, you can spread the emergency blanket in the tent. Another option is to include a first aid blanket on the outside of your sleeping bag to give you a good night's sleep.

If you accidentally fall into the water in summer, or encounter a heavy rain and your whole body is soaked, the advantage of the first aid blanket is that even if it is completely soaked in water, as long as you open it and shake off the water droplets when you use it, it will not affect the warmth retention effect at all.

When it rains, it can also be used urgently to set up a temporary tent or a temporary rain poncho. And no matter whether it is winter or summer, in the event of an accident and you need to spend the night in the mountains without any equipment, the first aid blanket is your sleeping bag. It can provide more protection for life.

A piece of film, which is only the size of a palm after being folded, may save you and the crisis at a critical moment. In a low temperature environment, putting it on can keep 80% of its own heat from dissipating; the strong reflection makes it easier for rescuers Find. It can be used as a poncho canopy in rainy days. It can be directly covered or put on the ground as a moisture-proof pad when sleeping.

The principle of keeping warm with first aid blanket

There are two main ways to keep warm

• Tianjia thermal insulation layer: The thermal insulation layer is generally some fluffy material, which uses the air mixed with the fluffy to form a non-flowing air layer on the surface of the object. The air itself is a poor conductor of heat, so it can play a certain role in keeping warm. General down and cotton use this method to keep warm.

• Heat-reflecting heat preservation: the use of high-reflection materials to reflect heat radiation back. The first aid blanket is a combination of these two principles. One function of the aluminum film in the aluminum-plastic film is to ensure that a layer of air on the surface of the human body is stable and does not flow. Its main function is that aluminum is a highly reflective material, which can reflect the heat radiation emitted by the human body back, and its heat reflection efficiency is as high as 90%. %above. This effectively reduces the rate of heat dissipation of the human body. Because aluminum is a metal, it is easier to tear and the strength is not high. Therefore, the main purpose of the composite plastic film is to increase the toughness and strength of the emergency blanket.

First aid blanket role

• Sun protection: In the hot sun, wearing the first aid blanket can protect the body from direct sunlight.

• Keep warm: When encountering cold weather in the wild, wrapping the first aid blanket can absorb the temperature and reduce the loss of body heat.

• Reflective: In the event of a disaster in the wild, wrap the emergency blanket around your body, and use its reflective effect to help rescuers find the target.

• Stretcher: The emergency blanket has good toughness, light weight, softness and strong plasticity, and can be used as a stretcher. A 200-pound person lay flat on the unfolded emergency blanket, and six people picked up the four corners of the emergency blanket and the middle of the edge of the blanket at the same time, which would not be damaged.

 Purpose of first aid blanket

• First aid blanket is mainly used in cold places, the purpose is to prevent the death of the human body due to hypothermia and hypothermia. When going out in winter, once the weather changes and the temperature of the sleeping bag is not enough, on the one hand, the first aid blanket can be spread in the tent. 

• Another way is to wrap the sleeping bag with a first aid blanket, which can make you sleep comfortably.

• In summer, if you accidentally fall into the water, or encounter a heavy rain, and your whole body is soaked, the advantage of the first aid blanket is that even if it is completely soaked in water, as long as you open it and shake off the water droplets when you use it, it will not affect the warmth retention effect at all. 

• When it rains, it can also be used to set up a temporary tent in an emergency, or use it as a temporary poncho.

• And whether in winter or summer, in the event of an accident and you need to spend the night in the mountains without any equipment, the first aid blanket is your sleeping bag.

Usually the first aid blanket is about two meters in length and width, and this size is to completely wrap the body. Some emergency blankets are simply made into envelope sleeping bags, and people can be directly put into them at critical times. The folded emergency blanket is only half the size of a palm and only a few millimeters thick. Packing such a thing in the bag will not be burdensome at all.

Although things like emergency blankets are inconspicuous, they are actually essential tools for survival in the wild. If you lose your equipment due to an accident and fall into desperation, this thin life-saving blanket in your pocket can support your confidence and protect you until rescue comes. , providing more protection for life. Let us be happier and enjoy the good time outdoors. For more tips on how to use first aid blankets, please follow China DRAGON's related first aid blanket products. Small objects with great functions, don't ignore the great role of lifesaving blankets in the outdoors, please include lifesaving blankets as a must-have item for your outdoor travel!

Exhibition Name：MEDICA 2022

Time: 14^th November -17^th November

Booth: Hall 17 17A41-6

Address:

MEDICA, holding in the major producer and importer of medical devices Germany, is the world's leading medical trade show with its irreplaceable scale and influence.

As one of the leading medical suppliers in China, Dragon Medical will bring the latest technological achievements and the best-selling medical products in 2022 to the 54th MEDICA in Düsseldorf with you.

We will be present in Hall 17, Booth 17A41-6, from Nov 14th to Nov 17th, 2022.

MEDICA showcases products and services in the field of emergency rescue and rehabilitation, including a wide range of medical equipment and supplies.

Dragon Medical's exhibits include the most popular first aid products in 2022, such as tourniquets, Israeli bandages, chest seals, pneumothorax decompression needles, nasopharyngeal airways etc. There will also be outdoor products for the European winter season such as various camouflage training clothing, windproof and warm masks, gloves, socks, etc.

Looking forward to your visit to Medica and welcome consult Dragon Medical about the products you are interested in.

The Decompression Needles from China factory is mainly used for thoracentesis and drainage. Its main function is to puncture patients with pleural effusion to drain pleural effusion, or to draw pus in the pleural cavity to treat empyema. It can also be injected into the pleural cavity. , as the treatment of disease. The China Decompression Needles is mainly composed of a puncture needle and a three-way device. Before performing thoracentesis, the patient's pleural effusion should be located by color Doppler ultrasound. Select the puncture site, disinfect the puncture skin, explain the puncture risk and process to the patient and their family members, and perform the operation after obtaining informed consent.

But how to use the China Decompression Needles from Manufacturer? Let me show you the secret.

Steps

1. Inform the patient of the procedure to be performed.

2. Confirm the acupuncture position (4th or 5th intercostal midaxillary line anterior).

3. Disinfect from inside to outside with alcohol cotton pads in concentric circles.

4. Secure the skin and insert the needle at a 90-degree angle.

5. When gas leaks, fix the hard needle and push the soft needle to the bottom.

6. Pull out the hard needle and throw it into the sharps recycling box.

7. Secure the soft needle.

8. Repeatedly observe the breathing condition of the injured person. If a blood clot blocks the catheter, it may be necessary to perform acupuncture decompression again.

In American TV series, you can see that doctors often use trocars to relieve pneumothorax in trauma patients. The patient may be having trouble breathing or has been in cardiac arrest. The doctor inserts a long thin needle straight into the patient's chest wall, and the patient is immediately saved.

This technique is thoracentesis, which is also translated as (Needle Decompression in China). When using a trocar for thoracentesis decompression, doctors found that the chest wall of some patients is too thick, and the 14G/16G trocar may not be able to enter the pleura. Cavity (the space between the parietal pleura and the visceral pleura, where air accumulates during pneumothorax, and it should be negative pressure under normal conditions). A trocar with a length of at least 6 cm is sufficient.

Therefore, the decompression needle from China factory came into being. ARS is similar to a trocar, but with a longer length and is designed in the form of a "writing pen", which is easy to carry.The China Decompression needles can be seen in many tactical first aid kits.Commonly used items include chest seals, nasopharyngeal tubes, etc.

Tension pneumothorax is a life-threatening condition in which excess air is introduced into the pleural space surrounding the lung, either through trauma to the chest cavity or as air leaks spontaneously from the lung itself. Air trapped in the pleural cavity causes the lungs to separate from the chest wall, disrupting normal breathing mechanisms. A pneumothorax may be small and not convert into tension, but when air is trapped in the pleural cavity significantly and inflates in volume, this abnormal increase in air pressure causes the lungs to shrink and collapse, resulting in respiratory distress. This pressure also pushes the mediastinum (including the heart and its great vessels) to change the central position, causing blood to fail to return to the heart and reducing cardiac output. Spontaneous pneumothorax tension causes chest pain, extreme shortness of breath, respiratory failure, hypoxia, tachycardia, and hypotension. They need to be relieved urgently when a patient is under extreme circumstances.

Spontaneous tension pneumothorax is clearly managed with procedures that allow the removal of trapped air, such as insertion of a chest tube. However, chest tube materials are generally not available in hospital settings. Palliative measures are required in deteriorating patients before or while chest tube material is collected. In these cases, emergency needle thoracic (also known as "needle decompression") is performed. Simply put, it is the insertion of a large hole needle or cannula through the chest wall and pleural cavity to allow air to escape into the pleural cavity. If the catheter or cannula is not immediately available, the procedure may be performed with a long, large-bore needle attached to a syringe. Insufficient space in the chest cavity where air can be drawn with a syringe. The metal needle cannot be left in the pleural cavity, as the pointed tip may cause further damage; therefore, it needs to inhale air from the chest wall once.