











Because Lifes Depend on It. Email: info@dragonmfc.com
In today's society in China, with the intensification of aging, there are many old communities in many cities, and it is very difficult for the elderly and the disabled to go up and down the stairs. Different from the new ones, the old communities are mostly not equipped with elevator equipment. The elderly living on the first floor will not be too troubled, but it is very inconvenient for the elderly and disabled people living on the upper floors to go downstairs. Especially for the disabled in wheelchairs, the elderly with inconvenient legs, and the disabled elderly, it is even more difficult.
In response to this situation, there are currently a variety of solutions. Urban planning is trying to install elevators in old buildings. Still, elevator renovations for old buildings are affected by the environment, space, ownership, costs, neighborhood relations, etc., and the cost of installing elevators. Due to various constraints such as high cost, there is no way to comprehensively spread and transform.
Electric dolly for stairs is a barrier-free facility that can be used as an alternative to an elevator, helping porters and other people to easily carry heavy loads up the stairs, and eliminating the need for spinal and possible physical damage to the porters. More importantly, it can enable people with limited mobility to get out of their homes and integrate into society. . The electric dolly for stairs is easy to operate, electrically controlled, with safety measures such as automatic braking, and does not occupy space in the corridor. It can be stored when not in use, which is very convenient.
1. Crawler-type electric stair climber
2. Stepping electric stair climbing machine
3. Curved seat stair climber
4. Linear seat stair climber
5. Wheeled electric stair climber
Different products can be selected to meet the needs of the disabled and the elderly according to the use environment and economic affordability.
Track-type seat elevators are divided into curved and straight, suitable for different stairs. The independent installation track does not need to be installed on the wall and can be folded when not in use, only occupying about 30 cm of space. The electric stair climbing machine is not only for the disabled, but the elderly with inconvenient mobility have gradually become the main use and service objects of the electric stair climbing machine.
Armrest adjustment: By adjusting the angle and length of the handrail of the electric stair climbing machine, it can adapt to different cargo centers of gravity and the height of other operators so that the operator can be in a labor-saving state during the operation of the electric stair climbing machine.
Body upright: Lean forward slightly, press and move the machine with both hands to stabilize the device, and go up and down the stairs according to the machine's rhythm during the operation.
Correct and standardized upstairs posture, the distance between the electric stair climber and the person is 3 steps.
During operation, press the handrail to resist the eversion force of the machine during the process of climbing the stairs and keep the balance between the stair climbing machine and the cargo.
If you are using a stair climber with brake assist: please turn on the brake switch before going downstairs so that the brakes will automatically stop on every next step to ensure safety. Just push to the edge of the stairs when going downstairs.
If it is a stair climber without brakes: Note that you need to find the downstairs point before going down each step to ensure safety.
The operator must be trained before using electric dolly for stairs.
Before using electric dolly for stairs, make sure that the use environment is suitable (such as the inclination of the stairs, whether the stairs are slippery, whether the stairs are free of obstacles, etc.) and that the power is sufficient.
The operation of the electric stair climbing machine should be completed by two people as far as possible.
The electromechanical equipment of the electric stair climbing machine should be regularly maintained and charged.
Don't panic if there is a problem; call the staff to get in touch.
DRAGON electric dolly for stairs supplier is engaged in the research, sales, rental, maintenance, and service of barrier-free products such as electric stair-climbing car stair-climbing machines and barrier-free corridor elevators. Wheelchairs and other styles.
With the development of society, the barrier-free travel needs of some groups such as the disabled and the elderly are becoming more and more urgent. DRAGON electric dolly for stairs manufacturer is committed to solving the problem of barrier-free travel for these groups of people, serving the elderly and the disabled. So that they can go up and down the stairs as freely as ordinary people to live and work normally, and help them easily overcome obstacles such as climbing stairs and ramps.
DRAGON electric dolly for stairs supplier has many years of practice and exploration, and the accumulated rich experience can customize your solution according to your actual needs
With a new generation of electric dolly for stairs, with it, parents can often go out for a walk, breathe fresh air, enjoy the beautiful sunshine, and enrich their old age.
Manual wheelchairs are those that require human strength to move them. Manual wheelchairs can be folded, stored, or placed in a vehicle, although modern wheelchairs may also be rigid frames. Ordinary manual wheelchairs are wheelchairs sold by general medical equipment companies.
It is roughly the shape of a chair. Four wheels, a giant rear wheel, a push wheel, and brakes are also added to the rear wheel, the front wheel is smaller for steering, and an anti-roll wheel is added to the back of the wheelchair. Suitable for people with general conditions or short-term mobility impairment, not ideal for sedentary periods.
The outdoor electric wheelchair is a wheelchair that adds means of electric motor and navigation control. Usually, a small joystick is installed on the armrest instead of manual power wheelchair movement.
Depending on the mode of operation, the rocker is used, and various switches are controlled by the head or blow suction system. For people who are severely paralyzed or need to move a lot, using an electric wheelchair is a good option if they have good cognitive skills but require more space to move.
Depending on the patient's condition, there are various accessories such as reinforced weights, unique cushions or backrests, neck support systems, etc.
Since the name is unique, the price is very different. In terms of use, it is also troublesome due to the variety of accessories, which are usually used in a severe or severe limb or trunk deformities.
Specially designed wheelchairs used for recreational sports or competitions. They are shared for racing or basketball and are commonly used for dancing. Generally speaking, lightweight and durability are characteristic, and many high-tech materials are used.
For example, scooters are wheelchairs in the broad sense and are used by many older adults. It is roughly divided into three and four wheels, driven by an electric motor, with a speed limit of 15km/h, and graded by load capacity.
Electric wheelchairs are made by superimposing high-performance power drives, intelligent controls, batteries, and other components based on traditional manual wheelchairs.
The new generation of intelligent wheelchairs with artificial control smart controllers can drive wheelchairs to complete various functions such as forward, backward, steering, standing, lying flat, etc. It is a high-tech product combining modern precision machinery, intelligent CNC, engineering mechanics, and other fields.
Nowadays, the outdoor electric wheelchair has become an indispensable transportation tool for the elderly and the disabled with reduced mobility. It is suitable for a wide range of applications. As long as the user's awareness is apparent and cognitive ability is average, an electric wheelchair is a good choice. Still, it requires a certain amount of activity space.
1. Lithium battery electric wheelchair, driven by a lithium battery, can be recharged repeatedly, small in size, light in weight, energy-saving, and environmental protection.
2. Can be pushed by hand, shaken, electric driving, and converted at will.
3. Foldable rack, easy for storage and transportation.
4. Both left and right hands can control the intelligent operation control lever.
5. Wheelchair armrests are also lifted, and the pedals can be adjusted and removed.
6. Adopt PU solid tires, waterproof and breathable cushion backrest, and seat belt.
7. Five-speed adjustment, 360° rotation at will with zero radii in situ.
8. Strong climbing ability and anti-tilting tail wheel design.
9. High safety factor, intelligent electromagnetic brake, and manual brake.
Wide audience. Compared with traditional wheelchairs, the powerful features of outdoor electric wheelchairs are suitable for the elderly and frail elderly and for severely disabling injuries. Stability, long-lasting power, and speed adjustability are the unique advantages of electric wheelchairs.
Convenient. Traditional pushchairs must rely on human push and pull to move forward. If there is no one around you, you have to push the roller yourself. Electric wheelchairs are not the same. As long as they are charged, you can efficiently operate them yourself without having to be accompanied by your family.
Environmental protection. Electric wheelchairs use electricity to start, which is more environmentally friendly.
Safety. The production technology of electric wheelchairs is becoming more and more mature, and the brake equipment on the body can only be mass-produced after many tests by professionals. The chance of an electric wheelchair getting out of control is close to zero.
Use outdoor electric equipment to enhance self-care ability. With an electric wheelchair, you can consider doing daily grocery shopping, cooking, ventilation, etc. One person plus an electric wheelchair can do it.
Seat width: Measure the distance between two hips or two strands when sitting down. After adding 5cm to sit down, there is a gap of 2.5cm on each side. The seat is too narrow; it is difficult to get on and off the wheelchair. The hip and thigh tissue is compressed; the heart is too wide to sit steadily; it is inconvenient to operate the wheelchair, the limbs are easy to fatigue, and it is difficult to enter and exit the gate.
Seat Length: Measure the horizontal distance between your back hip and calf fibula when you sit down and reduce the measurement by 6.5cm. If the seat is too short, the weight will fall mainly on the sciatic bone, which can easily cause excessive pressure. If the heart is too long, it will compress the burrow to affect local blood circulation and easily irritate the skin. It is better to use a short seat for patients with short thighs or hip or knee flexion contractures.
Seat Height: Measure the distance from the heel (or heel) to the burrow when sitting down; add 4cm; when placing the foot pedal, the board surface is at least 5cm from the ground. The seat is too high for the wheelchair to be at the table; the sciatic bone bears too much weight if the heart is too low.
Cushion: To be comfortable and prevent bedsores, the chair of the wheelchair should be placed with a cushion. Standard cushions are foam rubber cushions (5~10cm thick) or gel cushions. To prevent the seat from sagging, you can set a piece of plywood 0.6 cm wide under the seat cushion.
Chair back height: The higher the chair back, the more stable it is; the lower the chair back, the greater the movement of the upper body and upper limbs. Low chair back: Measure the distance from the seat to the armpit and reduce this result by 10cm. High chair back: Measure the actual height of the heart to the shoulder or back pillow.
Armrest Height: When sitting down, the upper arm is vertical, the forearm is flat on the armrest; measure the height of the chair to the lower edge of the forearm, plus 2.5cm. Proper armrest height helps maintain good body posture and balance and allows upper limbs to be comfortable. The armrests are too high, and the upper arm is forced to lift, making you prone to fatigue. If the armrests are too low, you need to lean forward to maintain balance, which is prone to fatigue and can also affect breathing.
Electric wheelchair supplier Other auxiliary parts: It is designed to meet the needs of particular patients, such as increasing the handle friction surface, carcass extension, anti-vibration device, armrest mounting armrest, or wheelchair table convenient for patients to eat and write, etc.
DRAGON Co., Ltd. is a high-tech enterprise engaged in the research and development, production, and sales of electric wheelchairs as an electric wheelchair supplier. Since its establishment, DRAGON has always adhered to the business principle of people-oriented, honest business and the ingenious spirit of "focusing on making products, keeping quality wholeheartedly," developing products that are genuinely suitable for consumers with mobility needs, and determined to become a service provider to solve travel problems.
Now our DRAGON electric wheelchair supplier's products have been exported to more than 30 countries, as electric wheelchair suppliers at home and abroad, we have a professional international logistics team to ensure that our customers receive the goods safely and on time.
Based in China, we are committed to continuously improving services and upgrading products. As an electric wheelchair supplier, we will strive to become one of the most reliable cooperative suppliers in the field of emergency rescue and safety protection. Our mission is to develop, manufacture and supply world-class products that meet our extremely high quality standards and exceed customer expectations. We warmly welcome customers from all over the world to establish cooperation with us!
electric stair climbing dolly (ESTDC), a new type of stair climbing equipment, was developed to overcome the problem of short-term power supply interruption and long-term maintenance. It can be used in the transport industry, distribution, and other related industries.
This product is widely applied in many areas such as transportation and distribution, warehouse and other logistics, construction sites.
Electric stair climbing dolly (ESTC) is a type of climbing equipment used to climb stairs. It is similar to a ladder and consists of an electric motor, a platform with a lot of steps and an automatic mechanism.
If you’ve ever wanted to mount an ESTC outside on your wall, then you’re in luck. They are rather easy to use and come with all the necessary components.
A technology that is widely used in the transportation and distribution industries, electric stair climbing dolly is a lightweight device that enables easy movement over a wide range of stairs. It can reduce the burden of heavy object handling at work, which in turn improves work efficiency.
Electric stair climbing dolly is basically a personal elevator. A person could stand on one side of the platform and move to another side, pulling up or lowering herself depending on her height. The device provides a safe and convenient way to move from floor to floor.
The electric stair climbing dolly weighs only 8 kilograms (17 pounds), so it saves material cost as compared with various lifting devices such as pneumatic cylinders or belts. Moreover, it has a small footprint that makes it highly portable; thus it can be used in compensation areas or areas without elevators.
Electric stair climbing dolly (sometimes referred to as "electric moon", "electric mountain", "electric vehicle", "electric motorcycle" or simply as "dolly") is a type of equipment that allows people to climb stairs on their own. The electric load stair climbing machine has three main functions:
To lift the heavy object such as wheelchair, chair, table, etc.
Electric overload stair climbing dolly
Electric flat-footed stair climbing dolly
Electric stair climbing dolly is a kind of electric load dolly. It is used in industry and transportation, distribution, and other related fields. The electric load dolly can reduce the burden of heavy object handling at work and improve work efficiency.
The above is an example of how to use an electric stair climbing machine. You don’t just want to get your product out there the moment you start. It takes time to build a true value proposition that people will want to buy into, especially if it’s your first product (or first product in an area where there are no accepted standards). But if you do it right you can get your product in front of users before they have time to switch off; it could be very powerful. Wanna know exactly how to use an electric stair climbing dolly?
The concept of electric stair climbing dolly is similar to that of an electric dolly. A special electric motor provides control power to the system in order to move the heavy structure. The structure can be moved by electricity or a hydraulic system. The vehicle is equipped with a load-carrying mechanism, which enables it to carry heavy objects such as stoves, tables, and other items.
Electric stair climbing machines are widely used in transportation, distribution, and other related industries because they are easy to install. It can reduce the burden of heavy object handling at work and improve work efficiency by reducing labor costs.
The spine board is made of fiberglass or fiberglass-reinforced plastic. The main advantage of this kind of material is that it can be easily folded and molded into any shape. It can be used to hold the spine and protect it from damage.
It’s a fairly simple setup: there are two parts, one for each side, with two holes opposite each other in the middle. It basically consists of a long piece (like a tablecloth) with a hole drilled through it. At the two opposite sides of the board, you attach one end to the table (or sometimes a hardboard or some kind of support) and then fasten the other end to your patient or another part of your equipment (which will support the patient). The whole thing is held together by screws, bolts, or rivets that pass through both pieces at different points on their lengthwise axis.
The most common problem when using this kind of system is that during exercise, air bubbles can get trapped in between the table and your patient as they exert pressure on each other – especially when you are holding them in different positions. Also, if you have a hard surface on either side (a soft surface would not work well because it might start squeaking), then in order to avoid air bubbles getting trapped between them you have to adjust the angle at which you open up those holes so that their edges touch one another – more on this later.
The folding spine board is made from fiberglass or fiberglass-reinforced plastic. It is a kind of material that can be easily folded and molded into any shape. It can be used to hold the spine and protect it from damage, for example when moving a patient on a stretcher, or when holding an object that needs to be kept from falling off the stretcher (such as a bag of medicine).
This type of material is great for moving patients on stretchers, but it’s also very useful in other applications such as holding bags of medicine or other stuff. You can use it to hold objects or parts of them while still keeping them stable on a patient’s back. You can also use this material while they are moving around their legs (and putting weight on their feet) because it absorbs some of the impact during their movements. It’s best used with inflatable medical devices so they don’t get damaged too much during transport.
The spine board is a piece of equipment that has its shape and location defined by the patient. This can be done by using some kind of padding, but it is also possible to move a patient on a folding spine board freely.
The right way to use the spine board depends on how the patient moves; if he or she walks towards you, for example, you will use the spine board in such a way that it does not interfere with his or her movements.
It is also important that you do not lie on the patient so that his or her weight remains relatively evenly distributed throughout their body. Lying down on the spine board can cause your patients to fall off, so it is important to keep them in an upright position as much as possible.
If you are moving your patient across different surfaces, then it is good to have a pair of floor mats or even carpet underfoot.
A good way to see how your patient would move on this kind of board is by trying out different positions yourself. Ask him or her where they would like to go next and follow them around while they are there, doing up-and-down movements and then turning around and around again.
The safest thing to do when moving patients who cannot move themselves (such as infants) is try standing behind them and being careful not to get too close—this can be dangerous for both of you! We also don't want our patients lying flat on their back either (to avoid spinal cord injuries).
Subscribe to our email list and stay upto date with all your latest updates