wheelchair for stairs- China Suppliers Factory Manufacturers

The Decompression Needles from China factory is mainly used for thoracentesis and drainage. Its main function is to puncture patients with pleural effusion to drain pleural effusion, or to draw pus in the pleural cavity to treat empyema. It can also be injected into the pleural cavity. , as the treatment of disease. The China Decompression Needles is mainly composed of a puncture needle and a three-way device. Before performing thoracentesis, the patient's pleural effusion should be located by color Doppler ultrasound. Select the puncture site, disinfect the puncture skin, explain the puncture risk and process to the patient and their family members, and perform the operation after obtaining informed consent.

But how to use the China Decompression Needles from Manufacturer? Let me show you the secret.

Steps

1. Inform the patient of the procedure to be performed.

2. Confirm the acupuncture position (4th or 5th intercostal midaxillary line anterior).

3. Disinfect from inside to outside with alcohol cotton pads in concentric circles.

4. Secure the skin and insert the needle at a 90-degree angle.

5. When gas leaks, fix the hard needle and push the soft needle to the bottom.

6. Pull out the hard needle and throw it into the sharps recycling box.

7. Secure the soft needle.

8. Repeatedly observe the breathing condition of the injured person. If a blood clot blocks the catheter, it may be necessary to perform acupuncture decompression again.

In American TV series, you can see that doctors often use trocars to relieve pneumothorax in trauma patients. The patient may be having trouble breathing or has been in cardiac arrest. The doctor inserts a long thin needle straight into the patient's chest wall, and the patient is immediately saved.

This technique is thoracentesis, which is also translated as (Needle Decompression in China). When using a trocar for thoracentesis decompression, doctors found that the chest wall of some patients is too thick, and the 14G/16G trocar may not be able to enter the pleura. Cavity (the space between the parietal pleura and the visceral pleura, where air accumulates during pneumothorax, and it should be negative pressure under normal conditions). A trocar with a length of at least 6 cm is sufficient.

Therefore, the decompression needle from China factory came into being. ARS is similar to a trocar, but with a longer length and is designed in the form of a "writing pen", which is easy to carry.The China Decompression needles can be seen in many tactical first aid kits.Commonly used items include chest seals, nasopharyngeal tubes, etc.

Tension pneumothorax is a life-threatening condition in which excess air is introduced into the pleural space surrounding the lung, either through trauma to the chest cavity or as air leaks spontaneously from the lung itself. Air trapped in the pleural cavity causes the lungs to separate from the chest wall, disrupting normal breathing mechanisms. A pneumothorax may be small and not convert into tension, but when air is trapped in the pleural cavity significantly and inflates in volume, this abnormal increase in air pressure causes the lungs to shrink and collapse, resulting in respiratory distress. This pressure also pushes the mediastinum (including the heart and its great vessels) to change the central position, causing blood to fail to return to the heart and reducing cardiac output. Spontaneous pneumothorax tension causes chest pain, extreme shortness of breath, respiratory failure, hypoxia, tachycardia, and hypotension. They need to be relieved urgently when a patient is under extreme circumstances.

Spontaneous tension pneumothorax is clearly managed with procedures that allow the removal of trapped air, such as insertion of a chest tube. However, chest tube materials are generally not available in hospital settings. Palliative measures are required in deteriorating patients before or while chest tube material is collected. In these cases, emergency needle thoracic (also known as "needle decompression") is performed. Simply put, it is the insertion of a large hole needle or cannula through the chest wall and pleural cavity to allow air to escape into the pleural cavity. If the catheter or cannula is not immediately available, the procedure may be performed with a long, large-bore needle attached to a syringe. Insufficient space in the chest cavity where air can be drawn with a syringe. The metal needle cannot be left in the pleural cavity, as the pointed tip may cause further damage; therefore, it needs to inhale air from the chest wall once.

A Foldable stretcher is also called an emergency stretcher. It is also known as a stretcher, Foldable stretcher, aluminum stretcher, aluminum alloy Foldable stretcher, simple stretcher, etc.

In life, we rarely come into contact with the use of stretchers to transport the wounded. Because we are no longer in the war years, we are now transported by specialized medical staff. But we still need to know the necessary handling knowledge, so what are the advantages of a foldable Stretcher?

Foldable and easy to transport and carry.

For example the Model DW-F007X

The China foldaway stretcher is characterized by its being lightweight, small-sized, easy to carry, use-safely, and easy for sterilization.

Easy to operate

The Foldable stretcher manufacturer is not bumpy and smooth to go up and down stairs, it is flexible in turning, so it saves time and effort and can be operated on in time and for a short time to rescue patients, which is widely used in hospitals to go up and down stairs and ambulances to transport and rescue patients.

Long service life

The fabric of the stretcher is sewn in high-density polyethylene-coated nylon and is flame retardant. Also, it is waterproof and hard-wearing. The frame of the stretcher is a high-grade aluminum alloy. The load capacity is up to 159kg.

In summary, the foldable stretcher suplier is safe to use with a carrying handle and is mainly used for carrying patients and wounded people in emergency centers, hospitals, and on the battlefield. It is easy to store and its ability to fold up is ideal for tight spaces.

The foldable stretcher is made of top-grade aluminum alloy with strict criteria and standards which are upheld, all the products are top-quality and come with a satisfaction guarantee.

This Foldable stretcher folds away compactly in its free carrying bag.

The stretcher has sturdy aluminum feet with rubber pads which keep the patient off the ground but also allow movers to safely get their hands Under the rubber handles.

Set up can be done by a single person in under 30 seconds from unzipping the bag to full deployment.

The thick PVC sheet that patients will lay on is fireproof, anti-tear, and stain-resistant making it reliable and easy to clean.

Additional points to note:

1, Never carry until personnel, stretchers, etc. have been properly prepared.

2、To prevent accidents such as falls during handling of overweight and unconscious casualties on the way.

3、At special sites, special methods should be carried out by the situation.

(1) At the scene of a fire, when carrying a member in the smoke, the waist should be dome or street running forward; at the scene of a toxic gas leak, the collector should first use wet wool to cover the mouth and nose or use a gas mask to avoid fainting from the gas.

(2) Before transporting the victim, check the vital signs and parts of the victim, focusing on the head, and chest, especially if the cervical spine is damaged.

4, First of all, keep the casualty's airway open, and then the injured parts of the casualty are required by the specifications for technology adoption to stop bleeding, bandaging, and fixation. Only after proper treatment can the casualty be moved.

5, In the process of moving to observe the casualty's condition, changes at any time.

Focus on the observation of breathing, consciousness, etc., pay attention to warmth, but do not cover the head and face too tightly, so as not to affect breathing.

If an emergency occurs on the way, such as room breathing or respiratory arrest, stop moving and carry out first aid treatment immediately.

Hospital beds can also be called medical beds, nursing beds, etc., which are used by patients when they are recovering. They are used in hospitals, township health centers, and community health service centers.

• About  the material, it can be divided into ABS hospital bed, all stainless steel hospital bed, semi-stainless steel hospital bed, all steel spray plastic hospital bed, etc.

• About  the use, it can be divided into medical beds and home beds.

About the function, it can be divided into China electric hospital beds and manual hospital beds. Among them, electric hospital beds can be divided into five-function hospital beds and three-function hospital beds.

Hospital beds gene rally refer to nursing beds, which are designed according to the patient's treatment needs and bed-ridden living habits. They have multiple nursing functions and operation buttons. Turnover, prevention of bedsores, alarm monitoring of bed wetting by negative pressure, mobile transportation, rest, rehabilitation (passive movement, standing), drug infusion and other functions,  The rollover nursing bed is generally not more than 90cm wide and is a single-layer single bed. It is convenient for medical observation and inspection and the operation of family members. It can also be used by healthy people, severely disabled people, the elderly, urinary incontinence, patients in stable or convalescent period of traumatic brain injury at home for rehabilitation and treatment. It is mainly based on practicality. The standard power bed includes a headboard, a multi-functional bed frame, one foot board,, one bed leg, controller, two electric push rods, two left and right folding guards, four insulated silent casters, Integrated dining table, 1 anti-decubitus air pump tray, under-bed shelf, 2 negative pressure connection bed wetting monitoring alarms, 1 set of weight monitoring sensor, linear slide and other components. There are ordinary beds, recovery beds, and intelligent turning beds. A hospital bed can also be called a hospital bed, a medical bed, a recovery nursing bed, etc. It is a bed used by patients during treatment, recovering and recuperation. The main using situation include  hospitals, township health centers, community health service centers, rehabilitation institutions, and family pensions. ward etc.

Hospital beds are used for long periods of time, must move back and forth, sometimes through narrow passages, and must stand firmly in the ward. To meet these requirements, the hospital bed must be equipped with suitable casters. It also helps the staff. Poor casters can pose health risks, while good casters improve working conditions.

Now, there are many hospitalized patients are bedridden patients, and it is very inconvenient for them to eat, wash, rinse, read, etc. on the bed. In addition, some critically ill patients were forced to sit upright for several days. In some developed countries, the hospital bed is equipped with a small mobile table that can be pushed and pulled back and forth. Provide table rest conditions for the above patients. Make the life of bedridden patients comfortable and convenient. However, the bed area is occupied when not in use, which affects the patient's activities and the operation of the medical staff on the patient to a certain extent, and also affects the neatness and beauty of the ward. Therefore, patients urgently need a hospital bed table that is easy to use, inexpensive, and does not occupy the floor and bed area during standby.Let me introduce to you our 3 best hospital bed, please check the following the details:

1.DW- MB01

Manual 1 Function Bed

1,Size:2000*950*500mm;

2,ABS Headboard and Footboard;

3,Collapsible aluminum guardrails;

4,Backrest:0-70°；

5,Wheels: 5" medical universal wheel with break

6,Packing size:200*95*18cm

7,G.W :56kg

2. DW- MB03

Manual 3 Function Bed

1,Size:2000*950*450~690mm;

2,ABS Headboard and Foot board;

3,Collapsible aluminum guardrails;

4,Backrest:0-70°，Leg rest：0-40°；

5,Wheels: 5" medical universal wheel with break

6,Packing size: 200*95*28cm

7,G.W :93kg

3.DW- EB03-3

Electric 3 Function Bed

1,Size:2000*950*450~690mm;

2,ABS Headboard and Footboard;

3,Collapsible aluminum guardrails;

4,Backrest:0-70°，Legrest：0-40°；

5,Wheels: 5" medical universal wheel with break

6,Packing size: 2050*950*290mm

7,G.W: 105kg

Hospital beds from China factory are used for long periods of time, must move back and forth, sometimes through narrow passages, and must stand firmly in the ward. To meet these requirements, the hospital bed must be equipped with suitable casters. It also helps the staff. Poor casters can pose health risks, while good casters improve working conditions.

Now, more than 90% of hospitalized patients are bedridden patients, and it is very inconvenient for them to eat, wash, rinse, read, etc. on the bed. In addition, some critically ill patients were forced to sit upright for several days. In some developed countries, the hospital bed is equipped with a small mobile table that can be pushed and pulled back and forth. Provide table rest conditions for the above patients. Make the life of bedridden patients comfortable and convenient. However, the bed area is occupied when not in use, which affects the patient's activities and the operation of the medical staff on the patient to a certain extent, and also affects the neatness and beauty of the ward. Therefore, patients urgently need a hospital bed table that is easy to use, inexpensive, and does not occupy the floor and bed area during standby.