











Because Lifes Depend on It. Email: info@dragonmfc.com
A surgical table is a device that is used to support and stabilize the patient during the operation. It has a number of important features: it can be used as an upright table, it can be locked, it can be positioned in various ways, it can be adjusted to the size of the operator.
The surgical operation table is a rectangular table with two parallel stretchers and a removable operating table bench. It is used for the surgical procedures of abdominal, thoracic and pelvic surgery, carotid endarterectomy, cesarean section and urethral surgery.
An operation table is a rectangular table with two parallel stretchers and a removable operating table bench. It is used for the surgical procedures of abdominal, thoracic and pelvic surgery, carotid endarterectomy, cesarean section and urethral surgery. The operation table can be used for comprehensive operations in obstetrics and gynecology, orthopedics, brain surgery, etc. It can meet the requirements of the surgical position and provide more flexible surgical space for medical staff. In this article we will explain how it is constructed in detail with drawing pictures to illustrate each step on how to build an operating table as well as its working parts. The operation table mainly consists of three parts: Operating Table Bench (sometimes called Surgery Table), Armrests (sometimes called Armrests), Scaffolding (sometimes called Scaffolding).
Operating Table Bench: This part contains the legs that support the operating tables legs (also known as stretchers) that hold up all parts of an operating room during surgeries such as Carotid Endarterectomy or Cesarean Section. If these legs are bent backwards or not installed it will make an uneven surface which prevents proper positioning of instruments during surgeries . This type of bench has four legs either side along one edge which are fitted into grooves on either side when they are installed in place on a scaffold . Then at another interval , each leg has an even number of holes drilled through them to prevent them from rubbing against one another . This type has four holes in each leg with a total length of approximately 20 cm long (8 inches long) . These holes are aligned so that when people sit on them it does not rub against any other part of their body (such as their head or face) when they rotate their back around due to turning around while sitting on them . A bench like this also needs to be sturdy enough to withstand heavy loads.
Surgery on an operation table is used in obstetrics and gynecology. It can meet the requirements of the surgical position and provide more flexible surgical space for medical staff. The operation table is a tool that uses a patient’s body for carrying out operations. The most important advantage of using an operation table is that it is flexible, which makes the procedure quicker and more efficient. This is because the patient has no weight or resistance, so there are no complications or errors during the surgery and operations can be done while the patient is still in bed.
Here is a quick overview of the different kinds of operations tables.
Operation tables are used in medical and surgical clinics, hospitals, and other health care facilities. They are used to help surgeons perform complex procedures such as surgery or heart bypass. They can also be used to assist with other surgeries such as hip replacements and knee replacements.
The operation table is a surgical theatre table used in some types of surgery.
The operation table has been developed mainly relying on good quality material, including wooden frame, metal frame, stainless steel frame and plastic frame. The wood frame is the most popular one. They are very durable and they are easy to clean. The metal frame with stainless steel parts has been developed mainly relying on good quality material, including wooden frame and metal parts with gold-plated finish. The plastic frames with polymer core have also been developed mainly relying on good quality material including wood frames and metal frames with plastic parts. Stainless steel frames could be used for heavy duty operations because of its high degree of corrosion resistance but it requires extra maintenance work because of their high cost.
Operational tables are very popular in surgical departments, both private and public. They can be used for many different types of operations. They are used in obstetrics and gynecology, orthopedics, brain surgery and more.
The operation table is the place where surgical staff can make their own decisions while operating on a patient. It is an important part of surgery and is also a very important tool for the staff to use during surgeries.
When they are used properly, they can help in reducing costs of surgeries as well as helping the patient to recover after it.
Operational tables are operated by applying pressure to them with a specially designed handle or making sure that the operator has enough space when operating. The table needs to be stable for proper operation because if there is any problem with it, the patient will not get the right results from it or will have problems during the procedure itself.
Operational tables should be easy to use and operate because if you don’t know how to work on it properly, you should not do so at all. If you want your surgeon or other medical staff to do their job correctly and efficiently, they must know how to operate an operation table well.
In certain situations, the surgeon is able to perform a procedure such as a cesarean section. In such situation, the umbilical cord can be cut and then transferred to the operating table in order to provide an alternative access route for the surgical staff. There are several ways of performing this operation. The first approach is to use a special cesarean section table, which is also called as “operation table” and it is usually placed in the operating room or operating theater. This special table is designed specially for this purpose, and it has two main components: The “umbilical clamp” (or “umbilical clamping device”) and the “cord clamping device” (or “cord clamping device”). The “umbilical clamping device” holds the umbilical cord on one side of the patient's abdominal wall, while on other side it terminates in a "cord clamp" which secures both sides of the cord.
In many cases, there are several umbilical clamps on one side of patient's abdominal wall. In many cases, there are more than one umbilical clamps on one side of patient's abdominal wall. This means that each umbilical clamps may be used more than once in some cases. Usually, after cutting one umbilical clamps off from patient's abdominal wall with "umbilical clamping device", another type of umbilical clamps can be inserted into that aperture provided by cutting off first type of clamps. A problem with this approach is that when another type of umbilical clamps are inserted into this opening, they may start tearing or cutting off part or entire parts from patient's abdominal wall as result of inserting too-long-length into surgical field or may not release from their anchoring points easily because they are not prepared properly for inserting into such anatomic spaces due to lack of proper surgical skills and knowledge by practicing surgeons.
It depends. Infusion is not necessarily required for 3 days, but depends on the specific condition and cannot be generalized. Firstly, if there are clear indications for infusion, such as high white blood cell, neutrophil, lymphocyte or mononuclear granulocyte counts in routine blood count and C-reactive protein, or high C-reactive protein index, infusion can be given in case of upper respiratory tract infection or respiratory disease caused by viral infection. If the body temperature is not high or if the temperature is consistently within 38℃, you can switch to oral medication after the symptoms improve after 1 day of infusion. Second, if there is a significant increase in blood count in routine blood tests and it is accompanied by severe hyperthermia or other organ and systemic diseases, such as abdominal pain or the presence of obvious cough, sputum and chest pain, infusion can usually be given for about 3 days. Thirdly, if there are clear pulmonary infections, urinary system infections and abdominal infections, infusion is usually required for more than 5-7 days.
The rate of intravenous infusion by a China IV stand, usually for adults, is usually around 40-60 drops per minute. Children and elderly people, due to incomplete organ development or reduced cardiopulmonary function, usually infuse at a slower rate. The clinical infusion speed is usually related to many factors such as the patient's age, weight, physical condition, and the nature of the drug. Patients with cardiopulmonary and renal diseases, or patients with a weaker constitution, should also have a slower infusion speed.
For drugs with more severe vascular irritation, or drugs that require continuous infusion in small doses, the infusion rate is generally slower. There are also drugs that require rapid infusion to achieve therapeutic effects, and the final infusion rate should be carried out according to the doctor's orders.
Usually the infusion of anti-inflammatory fluid by a IV stand can go down in about 3-7 days, but the exact time varies from person to person. Some people may take 7-10 days or even longer for the inflammation to go down, which needs to be judged according to the severity of the condition.
If there is inflammation in the body, you need to seek prompt medical examination to understand the severity of the inflammation. If the condition is mild and only a bacterial infection occurs without other complications, recovery can usually be faster by way of infusion, and the symptoms of the disease can be effectively relieved in 3-7 days. However, if the condition is more serious and complications arise after bacterial infection, such as the development of pneumonia and other lung infections, it may take 7-10 days for the infusion to reduce inflammation.
If the inflammation is caused by bacterial infection, it is generally recommended to first treat with antibiotic drugs such as cefazolin sodium and amoxicillin under the guidance of a doctor. If the infection is also complicated by a virus, it should also be treated with antiviral drugs, such as acyclovir and valacyclovir, under the guidance of a doctor. In mild cases, oral medication will be administered in a timely manner and the patient will gradually recover after a period of time. If the disease is more serious, then infusion therapy is recommended and is relatively more effective.
During the process of inflammation treatment, it is important to take good daily care and try not to go to crowded places frequently. It is also necessary to keep the air circulating in the room and pay attention to rest to help the condition recover.
Basket stretcher, also called "Stoke Basket" (Stoke Basket), is standard in two types on the market: aluminum alloy type and synthetic resin type; its shape is similar to its name, like a "small boat." When handling trapped persons, the trapped persons are placed in stretchers, which "protrude" around the edges, and flat belts on the front to "close" the trapped persons inside the stretcher. In this way, the trapped person will not be removed from the stretcher due to displacement (e.g., flipping, shaking) of the stretcher.
The basket stretcher can adequately fix the head, waist, legs and feet of the injured and sick patients through seat belts at sea or in the field, and the corresponding adjustment device can be adjusted precisely to achieve the purpose of fixing the injured and sick patients so that that ambulance personnel can carry them under different environmental conditions.
The seat belt can be disassembled according to the injured part of the injured patient, and a suitable position is found to be fixed; so that ambulance personnel can carry it under different environmental conditions; and the hook suspension can be connected with the hook on the aircraft to realize field rescue.
The simple and reliable device allows the operator to take first aid measures safely and quickly. It can be used more flexibly and stably in unique settings according to various emergency environments. Choose a basket stretcher according to the injury site and injury of the injured person.
It allows the injured to avoid a second injury.
The basket stretcher is constructed with an eye on the particularities of first aid, such as a rugged mountain, air, or sea rescue.
The frame is sturdy and durable, and the simple and reliable device allows the operator to take first aid measures safely and quickly.
The 3 hooks can be linked to the hooks on the plane for rescue in the field, and the stretcher is equipped with seat belts and cushions.
Made of stainless steel tube and net, it will not cause additional harm to patients, is more potent than a regular stretcher, can be used with a plate stretcher.
It Can be divided into two parts, access to transport and store.
1. Before carrying the injured person, the vital signs of the injured person and the place of injury should be examined, focusing on whether the injured person has suffered trauma to the head, spine, and chest, especially the cervical spine.
2. The wounded must be treated appropriately
First, the respiratory tract of the injured person should be kept open. Then the damaged part of the injured person should be stopped, bandaged, and fixed according to technical operating specifications. You can only move it after handling it properly.
3. Do not carry personnel, stretchers, etc. when they are not adequately prepared
When handling overweight and unconscious wounded, consider everything. It prevents accidents such as falls and falls during handling.
4. Observe the changes in the condition of the injured person at any time during handling
Focus on breathing, consciousness, etc., and keep warm, but don't cover your head and face too tightly to avoid affecting breathing. In the event of an emergency on the way, such as suffocation, respiratory arrest, convulsions, etc., stop carrying and immediately perform first aid treatment.
5. On particular sites, handling should be carried out according to unique methods
At the scene of a fire, carrying the wounded with a basket stretcher in heavy smoke should bend over or prostrate forward; at the location of toxic gas leakage, the porter should first cover his mouth and nose with a wet towel or use a gas mask to avoid being fumigated by the poison gas.
6. Carrying injured persons with spinal injuries and spinal cord injuries
Especially for cervical spine injuries, sandbags, pillows, clothes, etc., must be placed on both sides of the head and neck to fix, limit the movement of the cervical spine in all directions, and then select the forehead together with the stretcher with a triangle scarf, etc. Then the whole body is enclosed with the stretcher with a triangle towel, etc.
1. Supine position
This position can be used for all seriously injured persons. It can avoid excessive bending of the neck and spine and prevent vertebral dislocation. For open injuries with abdominal wall defects, when the wounded person shouts to hold his breath, the intestinal tract will prolapse, allowing the injured to take passive flexion of the lower limb position, preventing abdominal organs from prolapsing.
2. Side reclining position
After excluding neck injuries, lateral reclining positions may be used for patients with impaired consciousness. To prevent the injured from vomiting, food is inhaled into the trachea. When the injured person is lying on the basket stretcher, a pillow can be placed on his neck to maintain a neutral position.
3. Half lying position
For those with only chest injuries, pain, blood pneumothorax, and severe breathing difficulties are often caused by pain. This position can be used in cases of combined thoracic spine, lumbar spine injury, and shock to facilitate the breathing of the injured person.
4. Lie down
Injured patients with extensive chest wall injuries, abnormal breathing, and severe hypoxia may use the prone position. To oppress and limit irregular breathing.
5. Seated
Suitable for patients with pleural effusion and heart failure.
① The three porters kneeled side by side on one leg on one side of the injured person's body, and at the same time extended their arms into the shoulders, abdomen, buttocks, and lower limbs of the injured person, and then stood up at the same time, always keeping the body of the wounded in a horizontal position without twisting the body.
Three people step simultaneously and place the wounded on the basket stretcher at the same time. A person with or suspected cervical spine injury should have another person specifically responsible for traction and fixation of the head and neck. The injured person shall not bend forward, swing, or rotate left and right.
The four must move in unison while printing the wounded and placing them on the basket stretcher simultaneously. In the handling process of standing up, walking, and putting down, one medical staff must command the order and act uniformly.
② The porter may also have one leg brittle on both sides of the injured, one person responsible for the waist and buttocks of the injured person on one side, and two people on the other side for the shoulder, back, and lower limbs, respectively.
Since the end of 2019, the COVID-19 has spread globally, and the symptoms of infection are mainly fever, dry cough and fatigue. Severe patients have difficulty breathing, which can rapidly develop into acute respiratory distress syndrome, septic shock, multiple organ failure, and even death. The main means of transmission of the new coronavirus are droplets and direct contact. The spread of the virus is minimized by setting up physical partitions, emergency partitions, reducing personnel density, and strict cleaning and disinfection. Hospitals, airports, stations and other places that are prone to crowded people have become the focus of attention.
Therefore, the emergency department and fever clinic of the hospital are listed as the key prevention and control unit. In order to reduce the spread of the virus, the layout of the hospital is now adjusted and divided into polluted areas, potentially polluted areas and clean areas. Each area is equipped with isolated single rooms. The infusion chair is separated from the hospital bed to reduce the density of personnel. The infusion chair is also called the drip chair, which is mainly used in medical units to give patients infusion. There are many types of infusion chairs. The basic components are the infusion rod, seat plate, cushion, armrests, beams and accessories. The current infusion chair takes comfort and safety as the first choice. The waiting chair area of the hospital is also a key observation area. It is easy to gather people here, with patients and accompanying family members, which makes the spread of the virus easier. When choosing a station waiting chair, you should not only focus on its stability and safety, but also avoid choosing irritating color blocks. Try not to use the gray with low brightness, which will affect the indoor light. The whole space is very depressing. When the COVID-19 is indiscriminate, we should reduce gatherings in the waiting area of the hospital. It is best not to crowd all the waiting seats and try to separate the spaces.
As the New Year is approaching, it is advocated to stay in the local area for the New Year to reduce the risk of personnel movement. It is not necessary to go to high-risk areas. It is recommended to celebrate on-site festivals and New Year's greetings online, reduce visiting relatives and friends, and avoid crowd gatherings. Continue to maintain good personal hygiene habits such as “wear masks, wash hands frequently, ventilate frequently, gather less, use a rice noodle, and use chopsticks”.
Subscribe to our email list and stay upto date with all your latest updates